So when printing in place hinges, you should use tolerance values higher than the one that did not turn. When the print is ready, you use a screwdriver to turn the diabolic shaped objects from large to small tolerance, the last one that does not turn is the maximum tolerance of your printer. Please slice this STL file with your favorite slicer to obtain the G-code for your printer.
Basically, these are diabolic shaped objects in a slightly larger outer shape object. Now a real killer, when he picked up the ZF1, would have immediately asked about the little red button on the bottom of the gun. Sizes larger than 18x24 can now be found in the Oversized Prints Section. Extruder calibration is explained in more detail in this answer.Ī very good start to verify what exactly your tolerance problem is is to print this tolerance test. What does that red button do Pictured here is the 11 x 17 version. DO NOT LIFT OR MOVE MACHINE USING GANTRY. Jean-Baptiste Emanuel Zorg 2015 N/A The Fifth Element 192 Ruby Rhod 2015 N/A The Fifth.
• The extrusion process is not working optimal this could be related to over-extruding (incorrect steps per mm for the extruder, incorrect multiplier in the slicer, filament too hot) or the first layer height is incorrect (too low, so the lines spread out and tough each other). The
0 kommentar(er)
